StoneTech WBS12-32 Heavy Duty Exterior Stone and Masonry Sealer, 1-Quart Reviews
Other Picture
StoneTech WBS12-32 Heavy Duty Exterior Stone and Masonry Sealer, 1-Quart Feature
- Heavy-duty exterior stone and masonry sealer for superior water repellency and stain protection
- Designed for many types of interior and exterior surfaces
- Provides coverage for up to 250 square feet
- Contains FDA compliant solvent, and chlorine resistant
- Emits a very low odor; ideal for interior jobs
The StoneTech professional heavy duty exterior stone and masonry sealer is a superior water repellent and stain protector for all interior and exterior stone, ceramic tile, marble, limestone, granite, grout, saltillo tile, slate, terrazzo, travertine, sandstone and clay products. The liquid emits a very low odor, allowing the product to be used for interior or exterior jobs, and provides coverage for up to 250 square feet. The sealer is weather resistant, can inhibit efflorescence, is water repellant, features non-yellowing properties, and is great for building facades. The sealer also contains FDA compliant solvent and is chlorine resistant.
Always test in a small inconspicuous area with a 24-hour cure time to determine ease of application and desired results. Allow new grout installations to cure for a minimum of 72 hours prior to application. Make sure surface is clean, thoroughly dry and free of waxes and coatings. Surface temperature should be between 50??F and 80??F. Mask off and protect any baseboards or adjacent areas to avoid splashing and overspray onto surfaces not intended to be treated. Liberally apply an even coat with a paint pad, paintbrush, paint roller or solvent-resistant, low-pressure sprayer. Allow to penetrate the surface for 5-15 minutes; denser material may require more time for sealer to penetrate. During this time, distribute excess over entire area to insure even penetration. Thoroughly wipe the entire surface with a clean dry cloth to completely remove all excess sealer from the surface. DO NOT ALLOW SEALER TO DRY ON THE SURFACE. A second coat may be needed for porous, absorbent surfaces and should be applied one hour after initial application as directed in steps 2-3. If sealer was not completely wiped off and a residue appears, wipe entire surfae with a towel dampened with sealer. Use a white nylon pad to loosen residue and follow with a clean, white absorbent towel to remove. Do not walk on surface for at least 4-6 hours. Full cure is achieved in 24-72 hours. Clean equipment with mineral spirits. Size and Coverage Quart: 50-250 sq. ft. Expected Wear: 5-10 years Stonetech
Visit Store Now !!
Jul 18, 2011 02:16:03
No comments:
Post a Comment