Bosch Zero Clearance Insert by Peachtree Woodworking PW948

Bosch Zero Clearance Insert by Peachtree Woodworking PW948 Reviews

Other Picture

Bosch Zero Clearance Insert by Peachtree Woodworking PW948 Feature

• The insert is blank so you can custom fit the blade slot by passing your blade through it.
• Helps to prevent tear-out plus close the large factory gap.
• 13 5/8" x 3 3/4" - Made of UHMW

Table saw blade insert improves the safety and efficiency of your table saw. The insert closes the large factory gap which makes your saw safer and can improve your dust collection. The insert is blank so you can custom fit the blade slot by passing your blade up through the insert. Buy two, one for your regular blade and one for your dado blade.

Visit Store Now !!

Detail Products

• Bosch TS1002 Table Saw Rear Outfeed Support Extension
• Bosch TS1003 Table Saw Left Side Support Extension
• Bosch TS1007 Dado Insert
• Bosch TS1004 Table Saw Dust Collector Bag
• Bosch 4100-09 10-Inch Worksite Table Saw with Gravity-Rise Stand

Detail Reviews

Apr 30, 2011 14:11:03

S-B Power Tool Company 8-1/4 Circular Saw Blade 24Th Carb 75824

S-B Power Tool Company 8-1/4 Circular Saw Blade 24Th Carb 75824 Reviews

Other Picture

S-B Power Tool Company 8-1/4 Circular Saw Blade 24Th Carb 75824 Feature

• S-B Power Tool Company 8-1/4 Circular Saw Blade 24Th Carb 75824
• ROBERT BOSCH(S-B POWER)

Thin kerf saw blade for circular saws. Crosscuts lumber, plywood, OSB and hard-board siding. Alternate top bevel .100" kerf, 24 degree hook angle.

Visit Store Now !!

Detail Products

Detail Reviews

Apr 29, 2011 18:31:07

Festool 495209 197in Clear Replacement Splinterguard FS-SP 5000

Festool 495209 197in Clear Replacement Splinterguard FS-SP 5000 Reviews

Other Picture

Festool 495209 197in Clear Replacement Splinterguard FS-SP 5000 Feature

• Clear splinterguard enhances visibility of cut line
• A fresh splinterguard can be matched perfectly to the saw blade, providing precise alignment to your cut line, saving valuable set up time
• A fresh splinterguard is the best protection against tear out, for cuts both with the grain and across
• Change your splinterguard if you are switching between different kerfed blades or different saws, ensuring a precise match
• Includes one 197in (5000mm) Clear Splinterguard

FS-SP 3000 (197")(5000 mm) replacement splinter guard for FS3000/2 guide rail. Replaces the 118 mm splinter guard 488467.

Visit Store Now !!

Detail Products

• Festool 482107 Guide Rail Connector
• Festool 491473 Splinterguard for TS 55 and TS 75 Plunge Cut Saws, 5-pack
• Oshlun SBFT-160048 160mm 48 Tooth FesPro Crosscut ATB Saw Blade with 20mm Arbor for Festool TS 55 EQ and ATF 55 E
• Festool 491594 Quick Clamp For MFT And Guide Rail System, 6 5/8" (168mm)
• Festool 483164 55in Replacement Splinterguard FS-SP 1400

Detail Reviews

Apr 28, 2011 22:37:05

Sabre Saw Blades - 5 Piece

Sabre Saw Blades - 5 Piece Reviews

Other Picture

Sabre Saw Blades - 5 Piece Feature

• High carbon steel sabre saw blades
• Universal fitting blades
• Ideal for popular sabre saws, jig saws and scroll saws
• Color coded for easy identification
• Hardened and tempered for durability

Tempered high-carbon steel blades, universal shank fits most saws and color coded blade types. 5 Piece jigsaw blades: 3 inch x 8 tpi (yellow): wood, 3 inch x 10 tpi (orange): wood, plywood, 3 inch x 12 tpi (violet): plywood, 3 inch x 14 tpi (green): plywood, paneling, 2 inch x 24 tpi (red): metal.

Visit Store Now !!

Detail Products

Detail Reviews

Apr 27, 2011 14:49:03

Leecraft DW-2 Zero-Clearance Table Saw Insert for DeWalt Model DW744 and DW746

Leecraft DW-2 Zero-Clearance Table Saw Insert for DeWalt Model DW744 and DW746 Reviews

Other Picture

Leecraft DW-2 Zero-Clearance Table Saw Insert for DeWalt Model DW744 and DW746 Feature

• Table saw insert for eWalt DW744 and DW746
• Significantly reduces saw noise, dust, chip-out, and splintering
• Constructed of high-density phenolic laminate with a bonded-melamine surface
• User-friendly with leveling and lateral adjustment screws, rear anti-life pin, and precut blade bottom pocket
• Measures 13-5/8-by-3-3/4 inches (LxW)

The Leecraft Zero-Clearance Table Saw Insert for DeWalt DW744 and DW746 offers superior rigidity, flatness, durability, and low friction. This product is user-friendly with top-accessible leveling screws, lateral adjustment screws for a vibration-free fit, a rear anti-life pin, and a precut blade bottom pocket. It significantly reduces saw noise and dust, as well as chip-out and splintering. This saw insert is constructed of high-density phenolic laminate with a bonded-melamine surface to ensure a long life. It fits eWalt DW744 and DW746; instructions are included and the kerf serves as a handy stock alignment guide. This product measures 13-5/8-by-3-3/4-by-1/2-inch (length by width by thickness). LEECRAFT Phenolic Inserts and Sheet Stock reduce splintering and chip-out on the bottom side of regular or dado table saw cuts. Simply raise your saw blade through the insert to create a "kerf" which precisely matches the blade on your saw. These 1/2" thick inserts are precision machined from a nearly frictionless melamine faced, high density phenolic laminate.Offer durability and flatness unobtainable from cheaper plastic inserts.Features like top mounted set screws for precise leveling, front/side adjustment screws for perfect side to side and front to rear fit, and a rear safety pin that keeps the rear of the insert in place, make this the best insert we have ever seen.Sheet stock material (1/2" x 11" x 15") is perfect for creating your own custom jigs and fixtures. Complete with instructions. Insert surface colors may vary.

Visit Store Now !!

Detail Products

• Oshlun SDS-0842 8-Inch 42-tooth Stack Dado Set with 5/8-Inch Arbor
• MLCS 9167 Safety Push Block and Stick Package, 5-Piece
• DEWALT DW744XRS 10-inch Job Site Table Saw with Rolling Stand
• Dewalt Zero Clearance Insert by Peachtree Woodworking PW960
• Bench Dog 10-035 Bench Cookie Work Grippers, 4-Pack

Detail Reviews

Apr 26, 2011 19:42:05

OLSON 67 5/16" WB58167DB BAND SAW BLADE

OLSON 67 5/16" WB58167DB BAND SAW BLADE Reviews

Other Picture

OLSON 67 5/16" WB58167DB BAND SAW BLADE Feature

• 67 5/16
• 3/8" WIDTH
• .020 GUAGE
• SKIP TOOTH
• 4 TPI

67 5/16" X 3/8 WOOD BAND SAW BLADE

Visit Store Now !!

Detail Products

Detail Reviews

Apr 25, 2011 20:42:09

Thin Rip Table Saw Jig By Peachtree Woodworking PW3096

Thin Rip Table Saw Jig By Peachtree Woodworking PW3096 Reviews

Other Picture

Thin Rip Table Saw Jig By Peachtree Woodworking PW3096 Feature

• Make repetitive thin rip cuts on the left side of the saw blade on your table saw.
• Eliminates the danger of binding the stock between the blade and the fence
• This jig makes any size job fast and simple without having to move your fence.
• Large star knob secures the position of the jig
• The jig locks into a standard ¾" x 3/8" deep miter slot

This easy to use jig will allow you to make repetitive thin rip cuts on the left side of the saw blade on your table saw. This eliminates the danger of binding the stock between the blade and the fence reducing the risk of kick back. Whether you need to cut two strips or two hundred this jig makes any size job fast and simple without having to move your fence. The jig incorporates a double locking system - A single large star knob secures the position of the jig and locks the jig into a standard ¾" x 3/8" deep miter slot simultaneously. On the tip of the jig there is a ball bearing guide which keeps the stock firmly up and against the fence for great repeatability.

Visit Store Now !!

Detail Products

• Kreg DDS 3-Inch No.2 Square Driver Bit and 6-Inch No.2 Square Driver Bit for Kreg Pocket Hole Systems
• MSA Safety Works 817893 Adjustable Faceshield
• Kreg PRS3020 True-FLEX Featherboard - Twin Pack

Detail Reviews

Apr 24, 2011 21:20:03

Milwaukee 48-55-1077 Carrying Case for 6256-6 Jig Saw

Milwaukee 48-55-1077 Carrying Case for 6256-6 Jig Saw Reviews

Other Picture

Milwaukee 48-55-1077 Carrying Case for 6256-6 Jig Saw Feature

• 20 ga. steel with baked enamel paint to resist rust
• Ideal for tool and accessory storage

This 20 ga. steel carrying case holds the Milwaukee model 6256-6 Jig Saw and all related accessories. Covered with baked enamel paint for rust resistance, this case includes steel clasps for positive closure.FEATURES: 20 ga. steel with baked enamel paint to resist rust. Ideal for tool and accessory storage

Visit Store Now !!

Detail Products

Detail Reviews

Apr 23, 2011 16:53:05

1'' Round Knob, bolt, 1/4 20 tpi

1'' Round Knob, bolt, 1/4 20 tpi Reviews

Other Picture

Durable 1" Round Knob with bolt for your shop jig.

Visit Store Now !!

Detail Products

Detail Reviews

Apr 22, 2011 18:47:05

62 in (5'2") x 1/2 x .025 x 6H TPI Wood Cutting Band Saw Blade

62 in (5'2") x 1/2 x .025 x 6H TPI Wood Cutting Band Saw Blade Reviews

Other Picture

62 in (5'2") x 1/2 x .025 x 6H TPI Wood Cutting Band Saw Blade Feature

• Carbon Flexback blades are a low cost alternative on easy to cut material.
• Excellent fatigue factor to give long saw blade life on bandsaws running at high speed.
• Saw blade thickness .025"

Our carbon steel Flexback band saw blade is excellent for cutting wood. The flexible backer is also suitable for absorbing contour cutting stresses. The perfect blade for any woodworker/hobbyiest.

Visit Store Now !!

Detail Products

Detail Reviews

Apr 21, 2011 19:51:04

Workshop Tools 10"X50T Carbide Talon Blade

Workshop Tools 10"X50T Carbide Talon Blade Reviews

Other Picture

Workshop Tools 10"X50T Carbide Talon Blade Feature

• -ATB (alternate beveled teeth with deep gullet for efficient chip ejection.
• -Anti grabbing bite limiting tooth desing for ripping and crosscutting.

ATB (alternate beveled teeth with deep gullet for efficient chip ejection.-Anti grabbing bite limiting tooth desing for ripping and crosscutting. 5/8" arbor

Visit Store Now !!

Detail Products

Detail Reviews

Apr 21, 2011 00:10:07

MK Diamond 158942 SG-9 Gas Scarifier with 6 Point Carbide Drum

MK Diamond 158942 SG-9 Gas Scarifier with 6 Point Carbide Drum Reviews

Other Picture

MK Diamond 158942 SG-9 Gas Scarifier with 6 Point Carbide Drum Feature

• Designed to leave a clean, textured or rough finish on any type of concrete or asphalt surface
• Unique engage/disengage lever allows the operator to raise and lower the drum without losing the depth setting
• Drums available to provide cleaning, texturing, leveling, grooving and paint removal
• Drums are interchangeable and provide for fast and easy changeover

158942 Features: -Scarifier with 6 Point Carbide Drum MK-SG-9. -Designed for scarifying, roughening, planing, leveling, smoothing or creating grooves in concrete surfaces. -Can be used to remove paint or coatings and to clean and prepare concrete surfaces prior to coating, re-coating and floor covering installation. -Rugged sand casting and heavy gauge steel construction. -Precision adjustable depth control. -Engage or disengage lever allows operator to raise and lower the cutter drum without changing depth setting. -Quick-change drum. -Depending on cutting wheel style, production rate varies from 350 to 500 square feet per hour for a 1/8-inch removal depth. Specifications: -Item # 158942. -Engine/Motor: Honda Gas. -Power: GX270 Cyclone. -Drum Dimensions: 6'' x 8''. -Dimensions: 23'' L x 20'' W x 43'' H. -Weight: 233 lbs.

Visit Store Now !!

Detail Products

Detail Reviews

Apr 19, 2011 20:22:16

Laguna Tools Timber Master

Laguna Tools Timber Master Reviews

Other Picture

Turn your bandsaw into a lumber making machine! Laguna Tools continues to lead the market in quality bandsaw accessories with the new Laguna Timber Master. The Timber Master is designed to turn your bandsaw into a mini log mill. The heavy steel frame cabinets feature sliding doors and shelves for additional storage space for your shop and are powder-coated for durability. The Laguna Log-Lock system allows you to quickly position your work-piece for maximum support. The Timber Master features micro-adjusters to allow you to quickly and accurately set up for your next cut. The Timber Master makes material handling easier and safer and it is perfect for timber-framers and hobbyists. The Timber Master is great for resawing old reclaimed beams or logs that can be turned into valuable lumber.

• Log-Lock system standard with micro-adjust
• Miter slot reference system
• 5' stroke in standard configuration
• 10' overall length by 14 wide
• Optional extension kits available for 8' stroke and longer.

Visit Store Now !!

Detail Products

Detail Reviews

Apr 18, 2011 17:06:09

Milwaukee 48-00-5035 Super Sawzall Blade 6 Teeth per Inch 6-Inch Length

Milwaukee 48-00-5035 Super Sawzall Blade 6 Teeth per Inch 6-Inch Length Reviews

Other Picture

Milwaukee 48-00-5035 Super Sawzall Blade 6 Teeth per Inch 6-Inch Length Feature

• 6 TPI, 6 in. Length, Bi-Metal Construction
• 1/2 in. Universal Tang fits all Sawzalls
• 5 blades per pouch
• For very fast cutting in nail embedded wood and general roughing-in work.

5 Pack, 6" 6 TPI Super Sawzall Blade, Fast Cutting Nail Embedded Wood & General Roughing-in, High Performance, In Vinyl Pouch.

Visit Store Now !!

Detail Products

• Milwaukee 48-00-5036 Super Sawzall Blade 6 Teeth per Inch 9-Inch Length

Detail Reviews

Apr 17, 2011 20:33:05

Magic Molder LRH 6-pc Set P-28

Magic Molder LRH 6-pc Set P-28 Reviews

Other Picture

Magic Molder LRH 6-pc Set P-28 Feature

• convert your table saw into a molder with patented quick change lever-lock plug system
• carbide tipped anti-kickback chip-limiter design for safe, quiet tooling
• electronically spin balanced & vibration free no minimun HP requirement
• 5/8 inch arbor 7 inch diameter 1.5mm bite limit
• for natural wood & composite materials. Made Entirely in USA

Now you can teach an old saw new tricks! The Magic Molder replaces your existing saw blade to produce custom molding. Works to convert any left or right tilt table saw that can accomodate a dado set.

Visit Store Now !!

Detail Products

Detail Reviews

Apr 16, 2011 20:26:04

Skil 1619X01350 Base Plate for SHD77 (2610352080)

Skil 1619X01350 Base Plate for SHD77 (2610352080) Reviews

Other Picture

Skil 1619X01350 Base Plate for SHD77 (2610352080) Feature

• BOSCH POWER TOOLS
• Replacement Part
• 1619X01350

Skil 1619X01350 Base Plate for SHD77

Visit Store Now !!

Detail Products

Detail Reviews

Apr 15, 2011 23:17:03

1/8" Side Leg For MJ GRR-Ripper

1/8" Side Leg For MJ GRR-Ripper Reviews

Other Picture

With 1/8" Leg accessory for the GRR-Ripper, you will unlock your true potential for creating beautiful and unique details to enhance your projects without risking your safety. Make sure your next project stands out with the 1/8" Leg and the GRR-Ripper Control System.

Visit Store Now !!

Detail Products

• Micro Jig Handle Bridge for GRR-Ripper Adjustable Push Block
• Gripper(TM) 200 Advanced System
• Grr-ripper Deluxe Supreme System
• Deflector / Connector For Micro Jig GRR-Ripper
• Gripper(TM) Supreme

Detail Reviews

Apr 15, 2011 02:33:04